Keystone Multi-Quat Sanitizer

Spray, wipe, mop or third sink sanitize across a dilution range of 0.26-0.68 oz. per gallon water. This concentrated, no-rinse sanitizer multiplies the easy and adds up to smart.

  • SUPC Number: 7637569
  • Ecolab PIC: 6100091
  • GTIN Number: 10025469610918
Order Now
Features & Benefits

Features & Benefits:

Broad-range sanitizer, effective at 200-400 ppm

No-rinse procedure for simple sanitization

Quick, convenient application

Color-coded for easy product identification

Economical foodservice sanitizing


Non-porous food contact surfaces – tables, counters, utensils and food processing equipment.

Other hard nonporous surfaces – garbage storage areas, garbage bins and toilet bowls

Effective Against/On:

Escherichia coli*

Staphylococcus aureus*

(*When used at 0.25 oz-0.67 oz. per 1 gallon of 400 ppm hard water (200 ppm to 400 ppm active quat))

Campylobacter jejuni**

Enterobacter sakazakii**

Escherichia coli and Escherichia coli O157:H7**

Klebsiella pneumoniae**

Listeria monocytogenes**

Salmonella choleraesuis**

Shigella sonnei**

Staphylococcus aureus**

Yersinia enterocolitica**

(**When used at 0.32 oz.-0.67 oz. per 1 gallon of 500 ppm hard water (200 ppm to 400 ppm active quat))

How To Use

Dilution Rates:

  • Spray bottle: 250 ppm 0.42 oz/gal
  • 3 – comp sink: 250 ppm 0.42 oz/gal
  • Sanitizer pail w/cloths: 350 ppm 0.58 oz/gal

Directions for Use:

  • Please refer to product label for complete directions

Restaurant and Bar Rinse - Sanitizing Eating and Drinking Utensils

  1. Scrape and pre-flush utensils to remove excess soil.
  2. Wash with good detergent or compatible cleaner (see your Ecolab representative for a recommendation).
  3. Rinse with potable water.
  4. Sanitize in a solution of 0.25 oz.-0.67 oz. of Keystone Multi-Quat Sanitizer to 1 gallon of 400 ppm water (200-400 ppm active quat). In Wisconsin, sanitize in a solution of 0.32 oz.-0.67 oz. Keystone Multi-Quat Sanitizer to 1 gallon of 500 ppm water (200-400 ppm active quat).
  5. Immerse all utensils for at least 1 minute. Use 2 minutes exposure time if required by governing sanitary code.
  6. Drain and air dry.

Deodorizing Directions:

  • This product deodorizes garbage storage areas, garbage bins, toilet bowls and any other hard nonporous surfaces in odor causing areas.
  1. Mix ½ oz. per gallon of water and apply solution to surfaces.
  2. Thoroughly wet surfaces, allow to air dry.

Non-Food Contact Surface Sanitizing:

  1. Add 0.34 oz. of Keystone Multi-Quat Sanitizer per 1 gallon of water (200 ppm active quat) to sanitize hard, nonporous non-food contact surfaces.
  2. Apply sanitizer use-solution with a cloth, mop, sponge, sprayer or by immersion.
  3. For sprayer applications, use a coarse spray device.
  4. Spray 6-8 inches from surface. Do not breathe spray.
  5. Treated surfaces must remain wet for 60 seconds.
  6. Wipe dry with a sponge, mop, or cloth or allow to air dry.

Additional Notes:

  • For concentration testing, use quat test kit # 417, or QT 40 test strips (.25 - .67 oz/gal = 200 - 400 ppm)